Welcome to China Zhengzhou Zhongyue Silicon Carbide Electric Heating Element Manufacturer

China Zhengzhou Zhongyue Silicon Carbide Electric Heating Element Manufacturer

TEL:+86 13523030448

Email:xy9962@163.com

Products

Quality is our foundation!

U-shaped silicon carbide rodU

U-shaped silicon carbide rod

Email:xy9962@163.com

More Case

Principle

Relationship between service temperature and surface load of R element


Element using temperature and surface load




Design reference data of silicon carbide rod electric furnace


Silicon carbide furnace design data for reference


1. The center distance between the two rod piercing holes is 3-4 times the diameter of the rod end


The two rod threading hole between the center distance is 3-4 times the diameter of the rod end


2. The distance between furnace wall, heated object and element center shall not be less than the data in the table below


The fumace wall and the material to be heated and elementbetween the distance of not less the data in the table below




3. The perforation diameter of the furnace wall shall be 1.5 times the diameter of the rod used, and the gap shall be tightly blocked with asbestos wire.


The furnmace wall perforation should be used for 1.5 times the bardiameter,gap with asbestos line blocked strict.




Introduction of old process U-shaped silicon carbide rod



Related products recommended

Online message ordering

xy9962@163.com
Top
0.107777s